Ultratec Supercom 4400 Specifications Page 74

  • Download
  • Add to my manuals
  • Print
  • Page
    / 96
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 73
About the batteries
The Supercom 4400 runs on batteries when you unplug the
AC adapter or the power fails. Fully-charged, the six AA
rechargeable NiCad batteries will provide 45 to 60 minutes of
normal use.
When the power light blinks, you have about 5 minutes of battery
power left.
Checking the batteries
The batteries lose their ability to hold a full charge if you keep the
Supercom 4400 plugged in all the time. If you want to be sure the
batteries stay fully-charged, check them once a month. Follow these
steps to check the batteries:
1. Unplug the AC adapter.
2. Turn on the Supercom 4400 for 30 minutes (you can still use
it for calls during this time).
3. The batteries are fine if the power light still glows steadily
after 30 minutes. If the power light blinks within 30 minutes,
exercise the batteries.
4. Plug the AC adapter back in and turn off the Supercom 4400.
Exercising the batteries
1. Leave the Supercom 4400 on with the AC adapter unplugged
until the power light flashes.
2. Turn the unit off and plug in the AC adapter for 24 hours.
(You can use the Supercom 4400 for calls during this time).
3. Unplug the AC adapter and leave the Supercom 4400 on for
30 minutes.
4. Repeat steps 1 to 3 until the power light glows steadily after
30 minutes without the AC adapter.
72 • CARE & REPAIR
Page view 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 95 96

Comments to this Manuals

No comments